Welcome visitor you can login or create an account.

Phoenix Gold Elite .5 1700W 5 Channel Amplifier

Product viewed: 2026

Phoenix Gold Elite .5 1700W 5 Channel Amplifier

Power your car's entire audio system with ELITE.5, 5 channel car amplifier.  Phoenix Gold Elite series premium car audio amplifiers are direct descendants of the legendary MS/ MPS series designs that put Phoenix Gold in a class of its own. These Elite amplifiers are considered to be the pinnacle of excellence featuring only the finest audio components. Engineered for musical realism, producing true timbre and tonal accuracy that transcends standard amplifiers.   Smashing dynamic range reproduces the loudest and softest passages of your music with crystal clear detail, resulting in the finest sounding amplifiers Phoenix Gold has ever built.


  • Hybrid Design: Class A/B Topology Channels 1-4; Class D on Channel 5
  • Power Rating Front & Rear Channels: 100 x 4 @ 4 ohms Stereo | 150 x 4 @ 2 ohms Stereo | 300 x 2 @ 4 ohms Bridged
  • Power Rating Subwoofer Channel:  700 Watts x 1 Channel @ 2-Ohms |  1100 Watts x 1 Channel @ 1-Ohms
  • Dimensions: 23.3” L x 10.5” W x 2.6” H - 592mm L x 267mm W x 66mm H

Premium Build Quality for Ultra Performance

  • Burr Brown op-amps provide ultra low distortion and maximum resolution in the pre-amp circuitry and combined with Monolithic audiophile-grade signal capacitors provide frequency response past 50kHz
  • High current nickel plated buss bars connections ensure proper energy transfer
  • Legendary Phoenix Gold massive dual unregulated power supplies, featuring Triple Darlington technology are built for dynamic headroom and to drive low 1ohm impedance loads
  • Ultra low ESR and high energy secondary capacitors deliver maximum dynamic performance
  • Nickle plated panel mounted RCA connections ensure signal purity and provide a high quality connection
  • Clip light indicators ensure the amplifier reaches maximum undistorted output
  • Power supply transformers are hand wound, featuring a third windings (as opposed to the standard two) to ensure higher efficiency and lower operating temperatures

 Chassis Features

  • Extruded Aluminum Heatsink with Evenflow Technology
  • Exhaust vents are built into the endcaps. Airflow from the cooling system is pushed across the internal heatsink fins and exhausts out the side vents
  • The power supply is loaded with 16 IRF-3205 high current and high speed MOSFETs. They are clamped to the heatsink using precision aluminum extrusions for dual heatsinking and lower power supply operating temperatures
  • RMD port allows you to add a remote monitoring display, giving you a visual of the voltage of your system
  • Subwoofer level control with power and clip light indicators allow quick adjustments of the bass from the driver's seat

Total Control of Your Music Output

Variable filters on each channel allow you to fine tune your musical output  to the precision you demand:
  • Instruments and vocals are passed through with clarity to your front and rear channels with a Front/Rear High Pass Crossover Range of 20Hz to 4kHz
  • With a Rear Low Pass Crossover Range of 40Hz to 4kHz for high quality lower notes and Rear Band Pass Crossover Range of  20Hz to 4kHz for midrange or midbass in active applications
  • The subwoofer channel filters allow you to tailor your hard hitting bass with an available Low Pass Crossover Range of 30Hz to 300Hz and a Subsonic Crossover Range of 10Hz to 55Hz to eliminate unwanted ultra low frequencies, improving the efficiency of your subwoofer
  • Variable phase of the subwoofer channel output can be adjusted 0 to 180 degrees. This adjustment can help achieve better “up front” bass, by enhancing your sub bass and mid bass transition and resolve subwoofer cancellation problems in certain installations.  Resulting in tight, articulate bass that blends perfectly into the rest of your audio experience


Front & Rear Channels

Frequency Response ± 1dB from 20Hz to 50kHz
Signal to Noise Ratio >110dB
High and Low Pass Crossovers 18dB per Octave
Front/Rear High Pass Crossover Range 20Hz to 4kHz
Rear Low Pass Crossover Range 40Hz to 4kHz
Low Level Input Range 200 millivolts to 8 volts
Lowest Recommend Load 4 ohms Bridged or 2 ohms Stereo
Damping Factor Greater than 200
Typical Efficiency 55%
RMS Power 14.4Vdc ≤1% THD

100 x 4 @ 4 ohms Stereo

150 x 4 @ 2 ohms Stereo

300 x 2 @ 4 ohms Bridged


Subwoofer Channel

Frequency Response ± 1dB from 20Hz to 300Hz
Signal to Noise Ratio >100dB
Subsonic Filter 24dB per Octave
Low Pass Crossover 24dB per Octave
Low Pass Crossover Range 30Hz to 300Hz
Subsonic Crossover Range 10Hz to 55Hz
Lowest Recommend Load 1 ohm
Low Level Input Range 200 millivolts to 8 volts
Typical Efficiency 85%
Damping Factor Greater than 200
Lowest Recommend Load 1 ohm
Typical Efficiency 85%
RMS Power 14.4Vdc ≤ 1% THD

700 x 1 @ 2 ohms

1100 x 1 @ 1 ohm

Recommended Fuse Size: 150 amp

Power/Ground Wire Size: 1/0 Gauge

Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:

Related Products