Welcome visitor you can login or create an account.

Rockford Fosgate Punch P600X4 - 4 Channel Amplifier

Product viewed: 9065
£444.44 £520.00
Save: 15%

Rockford Fosgate Punch P600X4 - 4 Channel Amplifier

The Punch P600X4 multi-channel amplifier is versatile to power any audio system configuration. In addition to 4-channel stereo mode, you can bridge both channels to create a high power 2-channel amp, or run stereo speakers on the front with subwoofers on the rear in 3-channel mode. The variable HP/LP crossover and built-in Punch EQ allows for precise tuning of Bass frequencies and the Pass-Thru RCA jacks provide flexibility as your system grows and keeping Y-adapters to a minimum.

  • High level input capable with Auto Turn-On circuit
  • RCA pass-thru outputs
  • Features C.L.E.A.N. Set-up
  • Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator)
  • 12dB/octave Butterworth crossover
  • On-board Punch EQ with +18dB boost @ 45Hz.
  • Muted turn on
  • Stealth top mounted control panel
  • Cast aluminium heatsink
  • Short circuit protection
  • Over current protection


Specification:

  • Number of Channels:4
  • Rated Power (RMS Continuous Power):
  • 75 Watts x 4 @ 4-Ohm
  • 150 Watts x 4 @ 2-Ohm
  • 300 Watts x 2 @ 4-Ohm Bridged
  • Total Power (Sum of Rated Power): 600 Watts RMS
  • Dynamic Power (PVC/PowerCube® Measurement):
  • 129 Watts x 4 @ 4-Ohms 0° Res
  • 211 Watts x 4 @ 2-Ohms 0° Res
  • Bridgeable: Yes
  • Efficiency (average): 68% @ 4-Ohm
  • Crossover Controls: 
  • Front/Rear High-Pass (HP): 50Hz-250Hz @ 12dB/octave Butterworth
  • RFront/Rear Low-Pass (HP): 50Hz-250Hz 12dB/octave Butterworth
  • All-Pass: Yes
  • Tone Controls:
  • Front Punch EQ2 Bass: 0dB to +18dB @ 45Hz and/or
  • Front Punch EQ2 Treble: 0dB to +12.5dB @ 12kHz
  • Rear Punch EQ2 Bass: 0dB to +18dB @ 45Hz and/or
  • Rear Punch EQ2 Treble: 0dB to +12.5dB @ 12kHz
  • Function depends upon LP/AP/HP switch position
  • Signal Input: Hi/Low level: 2 RCA pair
  • Power Input Connector: Captive C-Clamp
  • Power Wire Gauge: 4 AWG
  • Speaker Output Connector: Captive C-Clamp
  • Speaker Wire Gauge: 8 AWG to 18 AWG
  • Heat Sink Type: Cast aluminium
  • Cooling: Convection
  • Remote Controls:Optional Punch Level Control (PLC2) Ready
  • Visual Indicators: Power/Protect/Thermal LED
  • Input Clip LED
  • Output Clip LED
  • Circuit Topology Class: Class-A/B
  • Frequency Response: 20Hz to 20kHz +/- 1.0dB
  • Dimensions (HxWxL): 2.38 x 7.76 x 13.28 (in) / 6.05 x 19.71 x 33.73 (cm)

Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Related Products
×
×
×
×
×
×
×